| Controlling with the IP9202: |
We've put together both a video guide and a text-based guide for this product. |
| Step 1: |
Using the IP 9202 controller unit in conjunction with the IP 9212. We're controlling a light in this demonstration
|
|
Using the IP 9202 controller unit in conjunction with the IP 9212. We're controlling a light in this demonstration.
|
| Step 2: |
Check the IP9202 controller box is correctly connected to the IP9212 with the supplied 15-pin cable
|
|
Check the IP9202 controller box is correctly connected to the IP9212 with the supplied 15-pin cable.
|
| Step 3: |
Open a web browser and log into the IP9212's configuration page. User name: admin, password: 12345678
|
|
Open a web browser and log into the IP9212's configuration page, with user name admin, and address 12345678. If you're not sure of the IP9212's IP address, run the IPEdit application from the CD to discover it.
|
| Step 4: |
"Set I/O" is automatically displayed. This shows that all 8 contacts are in the "off" state, which is as expected
|
|
"Set I/O" is automatically displayed. This shows that all 8 contacts are in the "off" state, which is as expected.
|
| Step 5: |
Connect the live wires from the device you want to control - in our case a light on a lead - into one of the supplied connection blocks
|
|
Connect the live wires from the device you want to control - in our case a light on a lead - into one of the supplied connection blocks.
|
| Step 6: |
Connect this connection block to port 8 on the IP9202
|
|
Connect this connection block to port 8 on the IP9202. The 8 ports differ as 4 of them have a default state of off, and 4 have a default state of on. As we're turning on a light, we want to connect it to a port with a default off state. The default state of each port is listed on the bottom of the unit
|
| Step 7: |
on the "Set I/O" page, change Out 8 to ON with the radio button, and click apply
|
|
On the "Set I/O" configuration page, change Out 8 to ON with the radio button, and click apply
|
| Step 8: |
The light lights up
|
|
The light lights up.
|
| Step 9: |
Setting OUT 8 to off turns the light off again
|
|
Setting OUT 8 to off turns the light off again.
|
| Step 10: |
Setting OUT 8 to off turns the light off again
|
|
Setting OUT 8 to off turns the light off again. Success! The IP9202 is now controlling.
|
|
