The IP Power 9212 Deluxe is a Network Controller and Sensor. You can check and change the device status via an internet browser anywhere in the world. It includes 8 Digital Inputs, 8 Digital Relay Outputs and works like an I/O Server.

- IP Power Delux 9212:
IP 9200 Base control unit (80x50x15 mm)
IP Power 9202 (80x50x15 mm)
IP Sensor 9201 (80x50x15 mm)
- RJ-45 patch cable
- 2x DB9 cables to connect 9202 and 9201 to 9200
- 16x Connections block to connect cables of your sensors, devices
- Manual, Quick Installation and SDK on CD.
- Power Adapter (100-240V) (UK 3 pin standard).

- Broadband hub, router or similar with free ethernet port
- Sensors and devices fitting electrical requirements

1 Year

back to menu

General Specification:

- Embedded web server. No PC needed for the unit to operate.
- 10/100Mbps Fast Ethernet Network Access (RJ45 Jack)
- With 8DI & 8DO: Direct control relay output (DO) and detection of digital input (DI)
- 8 Set Sensor (8 DI) � Default 4 Set Source mode (Dry - Voltage Input) and & 4 Set Sink mode (Wet- Resistance Input). Mode is switchable.
- 8 Set Controllers (8 DO) � Default 4 Set Normal Open (NO) & 4 Sets Normal Close (NC). Mode is switchable.
- Network protocols supported: HTTP, DDNS, SNMP, DHCP, Virtual and Dynamic IP.
- Support RS232 to control.
- Timer Schedule - pre-set the time to turn power on / off.
- Security code identification and Hardware reset function.
- Easy installation, setup and supports online upgrade.
- Individual LED indicates switch-working status.
- Safe, durable, non-electric leakage and anti-flammable design.
- Polar protection � even if connected to contrary port
- Digital inputs provide de-bouncing function
- Update firmware by the TCP/IP network.
- SDK (Software Development Kits) and Webpage Command Provided.
- Embedded "WATCH DOG" - by request
- Support GPRS � control and sense with WAP or WIFI mobile phones
- Support SMTP: Send IP address by E-mail as log in and send e-mail as detecting sensor trigger.
- 10 ms maximum operating time

Control Specification:

- 8x outputs
- 240 VAC, 60 VDC maximum switching voltage
- 12 A, AC/DC maximum switching current

Sensor Specification:

- 8x inputs
- Source mode (Voltage input):
ON: 4V - 24V
OFF: 0V - 3V
Examples: voltage sensor such as smoke, gas, density, infrared, motion detectors... Valve like high-temperature, high-pressure, automatic control valve�

- Sink Mode (Resistance input):
ON: 0-200 ohm resistance input
OFF: 500 ohm - infinity resistance input
Examples: resistance sensors such as door/window sensors.

Regulatory Approvals:

- FCC
- CE
- ROHS Compliant, (See http://www.rohs.gov.uk/ for details)

Here are some important video guides to show you how it works:

back to menu

back to menu

back to menu